Корреляционные зависимости для определения выгорания и содержания актинидов в облученном ядерном топливе
Анатацыя
Аб аўтарах
Г. СеребряныйБеларусь
Д. Рудович
Беларусь
М. Жемжуров
Беларусь
Спіс літаратуры
1. Radulescu G., Gauld I. C. and. Ilas G. SCALE 5.1 Predictions of PWR Spent Nuclear Fuel Isotopic Compositions, ORNL/TM2010/44, Oak Ridge National Laboratory, Oak Ridge, Tenn. March 2010.
2. Gauld I. C., Ilas G. and Radulescu G. Uncertainties in Predicted Isotopic Compositions for High Burnup PWR Spent Nuclear Fuel, NUREG/CR7012, ORNL/TM2010/41, prepared for the Nuclear Regulatory Commission by Oak Ridge National Laboratory, Oak Ridge. TN 2011.
3. Ilas G. and Gauld I. C. Analysis of Experimental Data for High Burnup PWR Spent Fuel Isotopic Validation-Vandellós II Reactor, NUREG/CR7013, ORNL/TM2009/321, prepared for the Nuclear Regulatory Commission by Oak Ridge National Laboratory, Oak Ridge. TN 2010.
4. Murphy B. D., Kravchenko J., Lazarenko A. et al. Simulation of Low-Enriched Uranium (LEU) Burnup in Russian VVER Reactors with the HELIOS Code Package, ORNL/TM1999/168.
5. Kalugin M., Shkarovsky D., Gehin J. A. VVER1000 LEU and MOX Assembly Computational Benchmark. Specification and Results// NEA/NSC/DOC(2002)10, OECD 2002. P. 156.
6. Jardine L. J. ISTC report «Radiochemical Assays of Irradiated VVER440 Fuel for Use in Spent Fuel Burnup Credit Activities», Lawrence Livermore National Laboratory, UCRLTR212202. April 2005.
7. Бибичев Б. А., Ловцюс А. В., Майоров В. П. и др. // Атомная энергия. 1980. Т. 48, вып. 5. С. 294-297.
8. Зеленков А. Г., Пирожков С. В., Пчелин В. А. и др. // Атомная энергия. 1981. Т. 51, вып. 1. С. 53-54.
9. Степанов А. В., Макарова Т. П., Бибичев Б. А. и др. // Атомная энергия. 1983. Т. 55, вып. 3, С. 141-145.
10. Makarova T. Investigation of Spent Nuclear Fuel from WWER440, WWER1000 and RBMK1000 Khlopin Radium Institute, St. Petersburg, Russia Consultant with IAEA, SGCP PSA 03.2004.
11. Standard Test Method for Atom Percent Fission in Uranium and Plutonium Fuel (Neodymium148 Method). American Society for Testing and Materials, ASTM E 321. 1996.