THERMODYNAMICAL EFFICIENCY OF A DETONATION ENGINE
https://doi.org/10.29235/1561-8358-2018-63-1-93-100
Abstract
An attempt has been made to analyze qualitatively and quantitatively the thermodynamic cycle of detonative combustion and to compare it with the Otto and Brayton cycles in order to establish the degree of its thermodynamic perfection. A comparison of the thermodynamic cycles of Otto, Brayton, and detonation was carried out for equivalent Carnot cycles, which has the same degree of thermodynamic perfection as the investigated cycles. To determine the parameters of the detonation cycle, the classical detonation theory based on the laws of thermodynamics and gasdynamics was used. It is shown that the detonation cycle in comparison with the cycles of Brayton and Otto has larger entropy at the end of the heat supply and smaller one at the end of the heat removal. That means it has a higher mean-integral temperature of heat input and a lower mean-integral temperature of heat removal. Thus, in the range of characteristic values of the adiabatic index k, the temperature at the end of the heat input process in the detonation cycle exceeds the Otto cycle temperature by about 7–15 %. Consequently, the detonation cycle is thermally more efficient, since the thermal efficiency of the cycle increases with the expansion of the temperature boundaries of the equivalent Carnot cycle.
About the Authors
Alhussan KhaledSaudi Arabia
Ph. D. (Physics and Mathematics), Director of the National Center for Aeronautical Technology, KACST, Saudi Arabia, National Center for Aeronautical Technology (KACST)
M. S. Assad
Belarus
D. Sc. (Engineering), Leading Researcher
O. G. Penyazkov
Belarus
Academician of the National Academy of Sciences of Belarus, D. Sc. (Physics and Mathematics), Director
I. I. Chernuho
Belarus
Ph. Student, Junior Researcher
References
1. Galligan C. E., Duboisy C., Stowe R., Kaliaguine S., Niaki H. Heterogeneous catalytic decomposition of JP-10: for use in a pulsed engine. Himicheskaya fizika = Russian Journal of Physical Chemistry B., 2005, vol. 24, no. 7, pp. 91–96.
2. Basevich V. Ya., Frolov S. М., Posvyansky V. S. Conditions for the existence of a stationary heterogeneous detonation. Himicheskaya fizika = Russian Journal of Physical Chemistry B., 2005, vol. 24, no. 7, pp. 58–68 (in Russian).
3. Medvedev S. P, Polenov A. N, Khomik S. V., Gelfand B. E. Deflagration-to-detonation transition in air-binary fuel mixtures in an obstacle-laden channel. Russian Journal of Physical Chemistry B., 2010, vol. 4, no. 1, pp. 70–74. DOI: 10.1134/ s1990793110010112
4. Breitung W., Chan C., Dorofeev S., Eder A., Gelfand B., Heitsch M., Klein R., Malliakos A., Shepherd E., Studer E., Thibault P. Flame Acceleration and Deflagration-to-Detonation Transition in Nuclear Safety. OECD State of the Art Report by a Group of Experts. NEA / CSNI / R (2000) 7. 2000. Available at: https://www.oecd-nea.org/nsd/docs/2000/csni-r2000-7. pdf (Accessed 20 Oktober 2017).
5. Baklanov D. I., Gvozdeva L. G., Kaltaev A., Shcherbak N. B. Transition of combustion to detonation in a turbulent flow in a pulsating detonation engine. Himicheskaya fizika = Russian Journal of Physical Chemistry B., 2005, vol. 24, no. 7, pp. 11–18 (in Russian).
6. Frolov S. M, Aksenov V. S., Basevich V. Ya. The initiation of detonation in the spraying of liquid fuels. Himicheskaya fizika = Russian Journal of Physical Chemistry B., 2005, vol. 24, no. 7, pp. 69–77 (in Russian).
7. Frolov S. M., Basevich V. Ya., Aksenov V. S., Polikhov S. A. Initiation of confined detonation by electric discharges. Roy G. D., Frolov S. M., Santoro R., Tsyganov S. A. (eds.) Confined Detonations and Pulse Detonation Engines. Moscow, Torus Press, 2003, pp. 157–174.
8. Roy G. D., Frolov S. M., Borisov A. A., Netzer D. W. Pulse detonation propulsion: challenges, current status, and future perspective. Progress in Energy and Combustion Sciences, 2004, vol. 30, issue 6, pp. 545–672. DOI: 10.1016/j. pecs.2004.05.001
9. Alhussan Kh., Assad M. S., Penyazkov O. G, Sevruk K. L. Formation of detonation in a pulsed combustion chamber with a porous obstacle. Journal of Engineering Physics and Thermophysics, 2012. vol. 85, no. 5, pp. 1052–1057. DOI: 10.1007/ s10891-012-0746-2
10. Assad M. S., Penyazkov O. G., Sevrouk K. L., Yaumenchycau M. L. Detonation Acceleration Research in Pulsed Combustor. Proceedings of 24th International Colloquium on the Dynamics of Explosions and Reactive Systems. Taipei, 2013, p. 131.
11. Assad M. S., Penyazkov O. G. Detonation in Heptane / Oxygen / Air Mixtures in a Pulsed Combustor. Proceedings of 2013 International Autumn Seminar on Propellants, Explosives and Pyrotechnics. Chengdu, Sichuan Province, 2013, pp. 284–286.
12. Assad M. S, Al’khusan Kh., Penyaz’kov O. G, Sevruk K. L. Influence of turbulent flow on the transition of combustion to detonation in mixtures of hydrogen with oxygen and air in a pulsed combustion chamber. Russian Journal of Physical Chemistry B., 2014, vol. 8, no. 2, pp. 181–185. DOI: 10.1134/s199079311402002x
13. Zeldovich Ya. B., Kompaneets А. S. Detonation Theory. Moscow, Gosteizdat Publ., 1955. 268 p. (in Russian).
14. Voitsekhovsky B. V., Мitrofanov V. V., Тоpchiyan М. Е. Structure of the Detonation Front in Gases. Novosibirsk, Press of the Siberian Branch of the USSR Academy of Sciences, 1963. 168 p. (in Russian).
15. Martynovsky V. S. Thermodynamic Characteristics of the Cycles of Thermal and Refrigerating Machines. Moscow, Gosenergoizdat Publ., 1952. 216 p. (in Russian).
16. Andryushchenko A. I. Principles of the Thermodynamic Cycles of Thermal Power Engineering Plants. Moscow, Vysshaya shkola Publ., 1968. 288 p. (in Russian).