Charcoal-containing microwave electromagnetic radiation absorbers with relief surface

A new technology for manufacturing microwave electromagnetic radiation (EMR) absorbers characterized by a geometrically inhomogeneous surface is presented. The novelty of the presented technology lies in the use of radiotransparent polymer forms with hemispherical depressions of the same volume, which are the component for the formation of the surface layer of absorbers. The technology consists in filling these molds with a mixture of powdered activated (birch) charcoal and the binder in the liquid phase and further drying it in the forms. Compared with analogues, the developed technology is characterized by low complexity of reproduction. Most of the time required to implement the presented technology is associated with the drying process of a mixture of powdered activated birch charcoal and a binder. The experimentally established patterns of changes in the values of electromagnetic radiation reflection and absorption coefficients in the frequency range 1.0–28.0 GHz of the absorbers manufactured in accordance with the presented technology are provided, depending on the type of binder contained in them (polyvinyl acetate aqueous solution, gypsum aqueous solution, polyurethane mastic). It was determined that the most effective of the EMR absorbers studied in the course of establishing the indicated patterns are those ones that contain an aqueous solution of polyvinyl acetate. Electromagnetic radiation absorption coefficient values in the frequency range 1.0–28.0 GHz of such absorbers vary from 0.75 to 0.99. In addition, the mass per unit area of such absorbers is 1.5–2.0 times less than the mass per unit area of absorbers containing an gypsum aqueous solution or polyurethane mastic. Microwave EMR absorbers manufactured using the presented technology are characterized by higher mechanical strength, as well as lower cost compared to analogues and are recommended for use in the creation of anechoic chambers.

1. Nornikman H., Malek F., Soh P. J., Azremi A. A. H. Effect on Source Signal Condition for Pyramidal Microwave Absorber Performance. International Conference on Computer and Communication Engineering (ICCCE’10), 2010, vol. 10, pp. 11–13. https://doi.org/10.1109/ICCCE.2010.5556825

2. Rodriguez V. Basic Rules for Indoor Anechoic Chamber Design [Measurements Corner]. IEEE Antennas and Propagation Magazine, 2016, vol. 58, no. 6, pp. 82–93. https://doi.org/10.1109/MAP.2016.2609821

3. Ali Z., Muneer B., Chowdhry B. S., Jehangir S., Hyder G. Design of Microwave Pyramidal Absorber for Semi Anechoic Chamber in 1 GHz~20 GHz Range. International Journal Wireless and Microwave Technologies, 2020, vol. 2, pp. 22–29. https://doi.org/10.5815/ijwmt.2020.02.03

4. Seng L. Y., Jack S. P., Yeow Y. K., Hoon W. F., Yew L. C., Seng G. H., Malek F. Enhanced Microwave Absorption of Rice Husk-Based Pyramidal Microwave Absorber with Different Lossy Base Layer. IET Microwaves, Antennas & Propagation, 2020, vol. 14, iss. 3, pp. 215–222. https://doi.org/10.1049/iet-map.2019.0571

5. Vagananthan B., Lee Y. S., You K. Y., Gan H. S., Wee F. H. Investigate the Effect of Dielectric Properties on Microwave Absorption of Pyramidal Microwave Absorber, Journal of Microwaves, Optoelectronics and Electromagnetic Applications, 2022, vol. 21, no. 2, pp. 328–336. http://doi.org/10.1590/2179-10742022v21i2257631

6. Méjean C., Pometcu L., Benzerga R., Sharaiha A., Le Paven-Thivet C., Badard M., Pouliguen P. Electromagnetic Absorber Composite Made of Carbon Fibers Loaded Epoxy Foam for Anechoic Chamber Application. Materials Science and Engineering: B, 2017, vol. 220, pp. 59–65. https://doi.org/10.1016/j.mseb.2017.03.009

7. Jung C. F., Jesus Pacheco D. A. de, Sporket F., Nascimento C. A. do, Ten Caten C. S. Product Design From Waste: A Novel Eco-Efficient Pyramidal Microwave Absorber Using Rice Husks and Medium Density Fibreboard Residues. Waste Management, 2021, vol. 119, pp. 91–100. https://doi.org/10.1016/j.wasman.2020.08.047

8. Basyigit I. B., Dogan H., Genc A., Colak B. A New Fire-Resistant Thin Pyramidal Absorber Based Straw and Gypsum Powder for Cost-Effective EMC Test Chambers. Engineering Science and Technology, an International Journal, 2023, vol. 40, art. ID 101344. https://doi.org/10.1016/j.jestch.2023.101344

9. Orakwue S. I., Onu I. P. Pyramidal Microwave Absorber Design for Anechoic Chamber in the Microwave Frequency Range of 1 GHz to 10 GHz. European Journal of Engineering Research and Science, 2019, vol. 4, no. 10. http://doi.org/10.24018/ejers.2019.4.10.1409

10. Boiprav O. V., Belousova E. S., Ahmetdinova E. S., Bogush N. V. Charcoal-Containing Building Materials for Electromagnetic Radiation Shielding. Magazine of Civil Engineering, 2023, vol. 117, no. 1, art. ID 11709. https://doi.org/10.34910/MCE.117.9

11. Kuznetsova T. V., Sychev M. M., Osokin A. P., Korneev V. I., Sudakas L. G. Special Cements. St. Petersburg, Stroiizdat Publ., 1997. 314 p. (in Russian).

12. Yang K., Periyasamy A. P., Venkataraman M., Militky J., Kremenakova D., Vecernik J., Pulíček R. Resistance against Penetration of Electromagnetic Radiation for Ultra-Light Cu/Ni-Coated Polyester Fibrous Materials. Polymers (Basel), 2020, vol. 12, no. 9, p. 2029. https://doi.org/10.3390/polym12092029

13. Zhuravlev V. A., Suslyaev V. I., Korovin E. Yu., Dorozhkin K. V. Electromagnetic Waves Absorbing Characteristics of Composite Material Containing Carbonyl Iron Particles. Materials Sciences and Applications, 2014, vol. 5, no. 11, pp. 803–811. https://doi.org/10.4236/msa.2014.511080

14. Morozov A., Vasilchenko A., Shapovalov V., Kochur A., Yavna V. Dielectric Properties of Heterogeneous Mineral Compositions Based on Bentonite and Gypsum. Transportation Research Procedia, 2023, vol. 68, pp. 947–954. https://doi. org/10.1016/j.trpro.2023.02.132

15. Funt B. L., Sutherland T. H. Dielectric Properties of Polyvinyl Acetals. Canadian Journal of Chemistry, 1952, vol. 30, no. 12, pp. 940–947. https://doi.org/10.1139/v52-114

16. Lorenzini R. G., Kline W. M., Wang C. C., Ramprasad R., Sotzing G. A. The Rational Design of Polyurea & Polyurethane Dielectric Materials. Polymer, 2013, vol. 54, iss. 14, pp. 3529−3533. https://doi.org/10.1016/j.polymer.2013.05.003

17. Chung D. D. L., Ozturk M. Electromagnetic Skin Depth of Cement Paste and Its Thickness Dependence. Journal of Building Engineering, 2022, vol. 52, art. ID 104393. https://doi.org/10.1016/j.jobe.2022.104393

18. Chikhi N., Passarelli A., Andreone A., Masullo M. R. Pyramidal Metamaterial Absorber for Mode Damping in Microwave Resonant Structures. Scientifc Reports, 2020, vol. 10, art. ID 19352. https://doi.org/10.1038/s41598-020-76433-3

19. Shen Z., Zu Y., Chen Y., Gong J., Sun C. Microwave Absorption Performance of Porous Carbon Particles Modified by Nickel with Different Morphologies. Journal of Materials Science & Technology, 2023, vol. 137, pp. 79–90. https://doi.org/10.1016/j.jmst.2022.07.036