Method of improving the production manufacturability of the product design
https://doi.org/10.29235/1561-8358-2024-69-1-28-38
Abstract
Due to the customization of production, it becomes especially important to test the design of the product for manufacturability at all stages of its creation. A method is proposed to improve the manufacturability of the product design at the stage of developing the working documentation of the product, based on its evaluation by summing the coefficients of manufacturability. The method consists in constructing a regression series of product design characteristics according to the degree of reduction of their impact on the complexity of the design and establishing the sequence of its improvement. It is recommended to improve manufacturability and reduce the labor intensity of manufacturing a product, to pay attention from the beginning to methods for achieving accuracy during assembly, as well as the use of the maximum number of purchased parts in assemblies; then on the repeatability of the types of connections of parts in the design, reducing the number of types and laboriousness of making connections, and finally on the repeatability of parts in the overall design, the maximum use of borrowed parts. It is shown that the typification of processes and the unification of structures can be effectively dealt with at the level of large associations (holdings, concerns) and especially industries.
About the Authors
B. M. Bazrov
Mechanical Engineering Research Institute of the Russian Academy of Sciences
Russian Federation
Russian Federation
Boris M. Bazrov – Dr. Sci. (Engineering), Professor, Head of the Laboratory “Theory of Modular Technology”
4, Maly Kharitonyevsky Pereulok, 101000, Moscow
M. L. Kheifetz
Institute of Applied Physics of the National Academy of Sciences of Belarus
Belarus
Belarus
Mikhail L. Kheifetz – Dr. Sci. (Engineering), Professor, Director at Institute of Applied Physics
16, Akademicheskaya Str., 220072, Minsk
References
1. Korsakov V. S. Fundamentals of Mechanical Engineering Technology. Moscow, Mashinostroenie Publ., 1977. 416 p. (in Russian).
2. Bazrov B. M., Troitsky A. A. Analysis of a method of assessment of technological effectiveness of a desing of a product, as production subject. SPRAVOCHNIK. Inzhenernyi zhurnal = HANDBOOK. An Engineering Journal, 2017, no. 4 (241), pp. 39–43 (in Russian). https://doi.org/10.14489/hb.2017.04.pp.039-043
3. Ross D. T., Schoman R. E. Structured analysis for requirements definition. IEEE Transactions on Software Engineering, 1977, vol. SE-3, iss. 1, pp. 6–15. https://doi.org/10.1109/tse.1977.229899
4. Bazrov B. M., Kheifetz M. L., Hurevich V. L., Popok N. N. Assessment production manufacturability of the design in the product life cycle. Vestsi Natsyyanal’nai akademii navuk Belarusi. Seryya fizika-tekhnichnykh navuk = Proceedings of the National Academy of Sciences of Belarus. Physical-technical series, 2020, vol. 65, no. 4, pp. 422–432. https://doi.org/10.29235/1561-8358-2020-65-4-422-432
5. Bazrov B. M., Kheifetz M. l. Method of presenting a product as an object of digitalization of manufacturing by a structured set of modules. Doklady Natsional’noi akademii nauk Belarusi = Doklady of the National Academy of Sciences of Belarus, 2019, vol. 63, no. 3, pp. 377–384 (in Russian). https://doi.org/10.29235/1561-8323-2019-63-3-377-384
6. Fores F., Boyer R., eds. Additive Manufacturing for the Aerospace Industry. Cambridge, Elsevier, 2019. 465 p. https://doi.org/10.1016/C2017-0-00712-7
7. Bazrov B. M., Kheifetz M. L., Hurevich V. L., Popok N. N. Systemology of objects and processes in digitalization of the life cycle of engineering products. Doklady Natsional’noi akademii nauk Belarusi = Doklady of the National Academy of Sciences of Belarus, 2021, vol. 65, no. 4, pp. 503–512 (in Russian). https://doi.org/10.29235/1561-8323-2021-65-4-503-512
8. Delchambke A. Computer-aided Assembly Planning. London, Chapman & Hall, 1992. 276 p. https://doi.org/10.1007/978-94-011-2322-8
9. Vitiaz P. A., Kheifetz M. L., Chizhik S. A. “Industry 4.0”: from information and communication and additive technologies to self-reproduction of machines and organisms. Vestsi Natsyyanal’nai akademii navuk Belarusi. Seryya fizikatekhnichnykh navuk = Proceedings of the National Academy of Sciences of Belarus. Physical-technical series, 2017, no. 2, pp. 54–72 (in Russian).
10. Bazrov B. M., Troitskii A. A. The method of summing the coefficients of production manufacturability of the product design. Tekhnologiya mashinostroeniya, 2020, no. 8, pp. 70−75 (in Russian).
11. Bazrov B. M. The Basis of Technological Preparation of Machine-Building Production. Moscow, KURS Publ., 2023. 324 p. (in Russian).
Review
Views: 111
Email this article 
